- Categories
- Categories
- AERIAL LIFTS
- AIR COMPRESSORS, TOOLS & ACCESSORIES
- AUTOMOTIVE TOOLS
- BOUNCE HOUSES AND INFLATABLES
- COMPACTION EQUIPMENT
- CONCRETE EQUIPMENT
- DEMO HAMMERS, DRILLS, AND BITS
- DOLLIES & MOVING EQUIPMENT
- GENERATORS
- HEATERS & FANS
- HOISTS/MATERIAL LIFT
- LADDERS & ACCESSORIES
- LANDSCAPE SUPPLIES
- LAWN & GARDEN EQUIPMENT
- MEASURING/LEVELING EQUIPMENT
- MISCELLANEOUS TOOL
- PAINT & WALLPAPER STEAMERS
- PLUMBING EQUIPMENT
- PORTABLE RESTROOMS & SINKS
- PRESSURE WASHERS
- PUMPS
- RUG & FLOOR CARE
- SALES, TOOL RELATED
- SAWS
- SKID STEERS & EXCAVATION
- TRAILERS & HITCH
- WOOD WORKING
SAWS
TOE KICK SAW
Image for reference only
Actual item may look different
Click on image for larger view
Click on above thumbnails for alternate view
Product Information
- Info
- Click HERE to watch our how-to video for this rental item.
- The extended spindle, low profile cutting head, and flush-mounted blade of this saw allow it to cut all the way against the inner wall of a toe-kick for removing old wood underlayment or wood flooring using carbide blade. You can also cut in to ceramic or porcelain tile using the diamond blade. Saw has a fixed cutting depth of 3/4" deep. Saves time and serious hard work!
- Additional Rental Items Needed For The Saw:
- Rental of Carbide Blade (For Wood): $8.00 Per Day / $32.00 Per Week
- Rental of Diamond Blade (For Ceramic, Porcelain) {BLADE NOT INTENDED TO CUT WOOD OR CONCRETE BACKER BOARD}: $12.00 Per Day / $48.00 Per Week
- COMMON PROBLEM AND SOLUTION:
- 1. If both blades are needed & you need to change blades, allen wrench provided in the carrying case can be used to remove the screw (Note: Saw has an arbor lock on it), so you can take the blade off. Please (if needed)reference first picture &/or instructions(in case) of how blade should look when mounted on saw (Order of assembly: blade driver with mounts facing out, next blade attached to the mounts (be sure you use the right set of holes on blade), & finally reinstall screw to hold blade in place.
- 2. If What You Are Cutting Or The Depth You Want To Cut Is Less than 3/4" Thick:
- -Using Carbide Blade: The manufacture suggests nailing down a strip of what you are cutting the width of the saw to adjust the cutting depth.
- -Using Diamond Blade: Manufacture suggests laying down underlayment or plywood at least the width of the saw so that the diamond blade cuts only to a depth corresponding to the thickness of the tile. (BLADE NOT INTENDED TO CUT IN TO WOOD OR BACKER BOARD)
- 3. Saw is intended to only cut forward & not intended to cut curves
- TROUBLESHOOTING
- Diamond Blade Getting Hot
- -Blade is air cooled, periodically (Cutting distance of 6' maximum) you will need to pull out of the cut, and let the blade cool down.
- -Blade could be glazed, blade not intended to cut backer board or wood. You may be able to deglaze the blade if you have a cinder block or similar item & use the saw & blade to cut in to this material.
| 4 Hour: | $20.00 |
|---|---|
| Daily: | $30.00 |
| Weekly: | $120.00 |
Also check the following item(s) related to the above:
Last Update: 1/30/2025 12:01:19 PM
** Current Customer ID: Application Order ID: 3 ASP SessionID: 529036950
========== HTTP_COOKIE: ASPSESSIONIDQWBSBRCS=GIGHIIPBFKNKINOEOMGKDLBD==========
** Current Customer ID: Application Order ID: 3 ASP SessionID: 529036950
========== HTTP_COOKIE: ASPSESSIONIDQWBSBRCS=GIGHIIPBFKNKINOEOMGKDLBD==========