- Categories
- Categories
- AERIAL LIFTS
- AIR COMPRESSORS, TOOLS & ACCESSORIES
- AUTOMOTIVE TOOLS
- BOUNCE HOUSES AND INFLATABLES
- COMPACTION EQUIPMENT
- CONCRETE EQUIPMENT
- DEMO HAMMERS, DRILLS, AND BITS
- DOLLIES & MOVING EQUIPMENT
- GENERATORS
- HEATERS & FANS
- HOISTS/MATERIAL LIFT
- LADDERS & ACCESSORIES
- LANDSCAPE SUPPLIES
- LAWN & GARDEN EQUIPMENT
- MEASURING/LEVELING EQUIPMENT
- MISCELLANEOUS TOOL
- PAINT & WALLPAPER STEAMERS
- PLUMBING EQUIPMENT
- PORTABLE RESTROOMS & SINKS
- PRESSURE WASHERS
- PUMPS
- RUG & FLOOR CARE
- SALES, TOOL RELATED
- SAWS
- SKID STEERS & EXCAVATION
- TRAILERS & HITCH
- WOOD WORKING
LAWN & GARDEN EQUIPMENT
STUMP GRINDER SC30
Product Information
- Info
- MACHINE REQUIRES FOUR 2" STRAPS TO SECURE TO TRAILER
- ***RECOMMENDED TRAILERS FOR HAULING: TRENCHER TRAILER, SMALL UTILITY, 5X10, 12' TILT DECK & TILT DECK-15'***
- ***NOTE--CUSTOMER IS RESPONSIBLE FOR MISSING AND/OR BROKEN & DAMAGED TEETH***
- ***REPLACEMENT COST IS $17/TOOTH***
- DIMENSIONS
- Length - 94 in
- Width - 35 in
- Height - 49 in
- Weight - 1550 lbs
- CUTTERWHEEL SPECS
- Cutterwheel Diameter w/o Teeth - 16 in
- Cutterwheel Thickness - 0.5 in
- Cutterwheel Speed - 1110 rpm
- Cutterwheel Straight Line Dimension - 35.5 in
- Cutterwheel Cut Above Ground - 25 in
- Cutterwheel Cut Below Ground - 12 in
- Tooth Description - Yellow Jacket Cutter System
- Number of Teeth - 16
- Cutterwheel Guard - Yes
- OPERATIONAL
- Fuel Tank Capacity - 6.8 gal
- Max Fuel Consumption - 2.4 gph
- Fuel Type - Gas
- Gross Horsepower (Maximum) - 25 hp
- Torque (Max) - 42 ft/lb
- Maximum Angle of Continuous Operation - 25 deg
- Hydrolic Tank capacity - 9 gal
- Recommended Oil Type - ISO 68
- Track Type - Rubber
- Track Width - 7 in
- Track Drive Pump Type - Hydrostatic
- Track Brake Type - Hydrostatic
- High Speed Travel - 3.2 mph
- INFORMATIONAL VIDEOS
- Click HERE to watch our how-to video for this rental item.
- TROUBLESHOOTING
- Cutter Wheel Not Engaging
- - Ensure machine is at low idle
- - Operator must have hand on boom control with green operator presence light illuminated.
- - Engage cutter wheel toggle switch
- Machine Will Not Start
- - If cooling fan is not on when key is on, likely have a blown fuse
- - Check oil level
- - Possible faulty battery
4 Hour: | $145.00 |
---|---|
Daily: | $250.00 |
Weekly: | $875.00 |
Also check the following item(s) related to the above:
Last Update: 12/22/2024 2:07:56 AM
** Current Customer ID: Application Order ID: 2 ASP SessionID: 1066087148
========== HTTP_COOKIE: ASPSESSIONIDCECDQDCD=MNCDLIPDCOINKJBMFLPNKAKL==========
** Current Customer ID: Application Order ID: 2 ASP SessionID: 1066087148
========== HTTP_COOKIE: ASPSESSIONIDCECDQDCD=MNCDLIPDCOINKJBMFLPNKAKL==========